Mazatrol 640T PC-FUSION-CNC rebuild

[Rajawi]

Hello mazatrol 640T pc-fusin owners,

i need a little favor, can any owner give me a photo of the inside of the rear electrical box, they called me to rebuild the machine but i found a missing driver in the middle right.

i dont know what kind of driver was installed so any help would be great, and also if anyone has the electrical diagram to send me i would be gratful

thanks all and waiting for your anwers

Similar Threads:

• Need Help!- Mazatrol Fusion Nexus 640T
• Need Help Spare Parts Mazatrol PC-Fusion-CNC 640T
• Mazatrol Fusion 640t Nexus 250 my

[Rajawi]

I'm just asking for a photo, it's not that hard to take a photo nd post it, please anyone can provide a photo i realy need it

[tspiszak]

Do you mean box behind the machine or behind the screen?

Sent from my D5803 using Tapatalk

[Rajawi]

thank you for your answer, i'm talking about the box behind the machine, but i realised that the mazatrol 640t is just a controller tha can be found in many diferent machines, i will post the reference of the machine

[navinbhas]

Hello mazatrol 640T pc-fusin owners,

i need a little favor, can any owner give me a photo of the inside of the rear electrical box, they called me to rebuild the machine but i found a missing driver in the middle right.

i dont know what kind of driver was installed so any help would be great, and also if anyone has the electrical diagram to send me i would be gratful

thanks all and waiting for your anwers

Mazatrol 640 used MDS-CH series of drive units. If you could share the details of machine model, I can give you the list of drive units for the machine