Mazak QT10 T Plus Breaker trip

[murphyc1]

Hi , I have a QT10 T Plus. It starts up ok and runs in AUTO for about 10 minutes then it stops an I get alarm TRIP Breaker and Emergency stop. Does anyone know what would cause this.

Similar Threads:

• MAZAK QT10
• mazak qt10 t2
• Problem- Mazak QT10
• Need Help!- Mazak QT10 T1
• Need Help!- MAZAK QT10 T-2

[sudsy]

Have you checked all the breakers??

[murphyc1]

Have you checked all the breakers??

Hi Bob, I have checked all breakers. It does start ok and runs for up to 10 minutes before I get "trip breaker" alarm. It will then not start again for at least 2 hours. I do not reset any breakers. I have reseated all the boards and connectors. Thanks , Chris.

[navinbhas]

Hi Bob, I have checked all breakers. It does start ok and runs for up to 10 minutes before I get "trip breaker" alarm. It will then not start again for at least 2 hours. I do not reset any breakers. I have reseated all the boards and connectors. Thanks , Chris.

Hi murphy.. Please share the led status on all the drive units

"Drive model" - "Axis Name" - "2 digit alarm code on drive"