Had a situation today where the turret didn't index to the correct tool and machine kept going. Result was a tool feeding into the turret until it overloaded and shut machine down.
Reset machine with no alarms but found that I can't call up any spindle speeds and the coolant pump won't come on either.
I replaced the 3 small fuses below the spindle control with no effect.
I am seeing what looks like- " r 0" on the spindle control display but have no idea what that means..
When I put machine in auto, it will call up first tool but spindle is not turning..
What/ where should I be checking ?? What should I be looking for ??
Thanks in advance for any replies.

Similar Threads: