Just In EIA/ ISO Mazatrol T Plus


Results 1 to 4 of 4

Thread: EIA/ ISO Mazatrol T Plus

  1. #1
    Registered
    Join Date
    May 2018
    Location
    United States
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default EIA/ ISO Mazatrol T Plus

    1998 Mazak Quick Turn 25L with Mazatrol T Plus.
    It appears presently only Mazatrol enabled programming and automatic cycle. Searched screen, bottom row of functions and tabs and no EIA/ISO programming. Could Parameter tab have a bit to enable EIA/ISO programming? Located P16 and bit 3 of 1 which, appears enabled EIA but no EIA tab to switch to page yet. Are any other Parameters required to enable EIA program and switch to it's page, if is, which one's?

    Similar Threads:


  2. #2
    Registered
    Join Date
    Sep 2017
    Location
    Bahrain
    Posts
    60
    Downloads
    0
    Uploads
    0

    Default Re: EIA/ ISO Mazatrol T Plus

    You would have to check if the option is enabled or not.



  3. #3
    Registered
    Join Date
    May 2018
    Location
    United States
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Re: EIA/ ISO Mazatrol T Plus

    Mazak Program and Parameter Manual indicates Mazatrol T Plus includes EIA/ISO programming. Located other Parameter EIA bit's in the Manual but haven't checked if disabled or enabled yet. Considering enabling all EIA bit's to see results. Could EIA program be an option to install with machine from a Distributor and Service Technician and requirement regardless the already stored bit's?



  4. #4
    Registered
    Join Date
    May 2018
    Location
    United States
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Re: EIA/ ISO Mazatrol T Plus

    It might be Mazatrol program to EIA/ISO Converter tab to get G code program and without Tape. Yet this tab doesn't appear available with particular control.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

EIA/ ISO Mazatrol T Plus

EIA/ ISO Mazatrol T Plus