4th axise remove from mitsubishi control

[m.amir]

pls help .i have leadwel m/c mcv.0 with mitsubishi control .
i want remove 4th axise. because its no working and also idont want to use
so wich parameter can disable 4th axise.
thanks.

Similar Threads:

• Mitsubishi Control
• Fanuc Robodrill 16M Control Error Code 101 - How To Remove?
• Mitsubishi control
• KIA with Mitsubishi 520 Control
• Mitsubishi Control help

[Al_The_Man]

What model Mitsubishi?
Al.

[m.amir]

it is mitsubishi - meldas-m3 control

[140jodel]

Hi,
Does anyone have a servo amplifier unit for a (mitsubishi Meldus-M Control) Leadwell MCV-O vertical milling machine. It does not matter if it requires repair.
Can anyone please tell me where I can purchase a second hand one,
and lastly can i switch a 4th axis with its own power without this card?
Thank you. Louis.

[Caprirs]

m.amir, to remove the 4th axis:

- Go to your Tool/Param screen.
- Press the "Next" button.
- Press "Axis" at the bottom of the screen.
- Press "Next" 3 times to get to the 4th axis screen.
- Change #4 "Axis release" to "1".

You should be able to power off the machine and remove the 4th axis. When powering back up, the control should not look for the 4th axis and there should be no alarm.

[HASSANDABBAGHAN]

pls help .i have leadwel m/c mcv.0 with mitsubishi control .
i want remove 4th axise. because its no working and also idont want to use
so wich parameter can disable 4th axise.
thanks.

Hi M.r Amir.
I have takumi V11A with mitsubishi M520 control.
I want remove 4th axise too.
Can yuo help me?
Best regards
Hassan