Meldas 500L Citizen E25J P430 Alarm

[jayrab]

New to the forum looking for some help.

I am getting a P430 error (AXIS NOT RET.)
It is during a simple body turn op

(35-DEG-TURN-BODY)(3009310)
T1111
M3S1=3000 
G0X.905Z-.001 
G1X.300F.010 
G0Z-.05 
G41 
Z0 
G1X.5825,C.040F.002
Z.737
X.6355
Z.877F.002
X.6815,A15.0
Z1.367
X.752
X.763,A15.0
Z1.927
X.868
Z2.192
X.828Z2.272
Z2.389
X.905
G0G40X6.3T0 
M5

Last line it runs is the Z0 line then alarms out?

New to Programming so any help would be greatly appreciated.

Similar Threads:

• Parameters for Citizen Cincom L16 With Meldas 320 CNC control
• Need Help!- Mitsubishi Meldas 500 alarms on citizen
• Need Help!- citizen a32 S3 alarm
• Need Help!- Problem with Mitsubishi Meldas FCA320LC-V Control for Citizen l20/VII Machine
• Problem- Citizen E25J

[jayrab]

Found the issues was missing a comma in front of the C accidentally deleted on machine somehow.

[dudesmpd]

Found the issues was missing a comma in front of the C accidentally deleted on machine somehow.

Just got the same machine. Any chance I can message you with some set up questions?