Need Help! MAzak VTC20CM Bus Error


Results 1 to 3 of 3

Thread: MAzak VTC20CM Bus Error

  1. #1

    Default MAzak VTC20CM Bus Error

    Hello Everyone,

    I hope someone can help us out, We have a 1997 Mazak VTC20 with Mazatrol M Plus New to us fro Auction. Recently the system was powered down and for a couple months when power was restored the main screen reads. Bus Fault Error $2A58002A at or near $009E82A. Picture attached. We changed the battery but had no effect on the errors. Any help would be greatly appreciated.

    Thanks Chris,

    Similar Threads:
    Attached Thumbnails Attached Thumbnails MAzak VTC20CM Bus Error-20151026_140546-jpg  


  2. #2
    Member guhl's Avatar
    Join Date
    Aug 2007
    Location
    Russian Federation
    Posts
    793
    Downloads
    0
    Uploads
    0

    Default Re: MAzak VTC20CM Bus Error

    hello have you managed to solve the problem?



  3. #3
    Registered
    Join Date
    Aug 2010
    Location
    TURKEY
    Posts
    7
    Downloads
    0
    Uploads
    0

    Default Re: MAzak VTC20CM Bus Error

    problem ne oldu acaba



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

MAzak VTC20CM Bus Error

MAzak VTC20CM Bus Error