hi laamar,
assume that the parameter was 00000000, and you would like to change it into 01001101, so you have changed 4 bits , so to enter type 010011014 then input
sting
I to have lost the parameters on a t1,I have them in a book and inputed all on page1 , but are having trouble inputing the binary codes on page 2 p1 onwards, the first p1 is 01001101 I type this but cannot input them with an error saying invalid number. Any help would be great
hi laamar,
assume that the parameter was 00000000, and you would like to change it into 01001101, so you have changed 4 bits , so to enter type 010011014 then input
sting
Thank you for the quick reply I will do that. I was pulling my hair out trying to input those codes.
Al can you send the parameters forthe mazatrol t1 to me please? buddy@mtelco.net
Thanks, Gene
Hi Al, I need parameters for a mazak T1 controller, I read you have papers about it. My mail is ohathays@hotmail.com
Carlos.
I need parameters for a Malak quick turn 10 universal with an air Chuck and a maxatrol t-1 control. If anyone has them please take a few pics of both pages or email to kim@apmachineshop.com or kimbauknecht@yahoo.com
Good morning :-) can you send me the parameters for a Malak quick turn 10 universal with a maxatrol t-1 control with an air Chuck. I hope you have these avail. I'm at a loss. Send to either here or kim@apmachineshop.com or kimbauknecht@yahoo.com with the 2 pages of parameters. Thank you for your time
Sent
Al.
CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
Hello Al, I know this is an old post but anything is worth a try. I have a very old quick turn ot-u with mazak t-1 controller. In between me buying it and moving it a delightful scumbag removed the parameter list from the folder. Mazak havent got them as the machine is so old, the Mazak engineer has helped me as much as he can but he has never even seen one. I can get it to move and do things but not properly as it should do. Any help will be appreciated.
Stuart
woodbutchery@btinternet.com
stupokeit2@gmail.com
Last edited by pokeit; 10-23-2017 at 03:19 AM.
P.M. sent
Al.
CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
Micro Slant 15 ?
Thank you.
Good day, We bought a Mazak Slant turn 25 universal 1000, with mazatrol t1 control, the manuals we received with the machine was not the correct manuals. lost battery power on machine and need to reload parameters. i would appreciate if you could please forward me the copy that you have. i have searched everywhere and can not find the parameters. thank you in advance. my e-mail address is : taurusrecyclingsystems@gmail.com