Mazak T2 parameter input format?

[nervis1]

This is on a QT-8 with a T2 control.

I need to change parameter OP-5 to tell the control I have the tool setter back on. I have the parameter list and what 0s to change to 1s. I found out the control wants these left to right...got that far. I try and type in 00001000 but the control won't accept it.

The bits are displayed as 0000 0000 with a space between the groups of 4. I don't have a space key on the control and that may be where the problem is. I tried putting a 0 there and . and -. Did not work either.

Anyone know how to type this in?

Similar Threads:

• Need Help!- mazak 640t decimal format parameter ?
• Need Help!- 5t parameter input protocols? And a hello
• Fanuc 10M Parameter input
• Need Help!- Fanuc 7M parameter input
• Need Help!- Meldas M0- cannot input xyz axis parameter

[Al_The_Man]

With the parameters, you need to add a parity bit (9 bits) so if you are entering 00001000 you add a 1 on the end for the one bit set.
e.g. 000010001 if it was 00001101 the entry would be 000011013
Al.

[nervis1]

Wow thanks Al. I would have never figured that one out. A guy on the PM board said the same thing.

Appreciate the help.

Dave

[prodi01]

Hello does anyone have a hardcopy of parameters for a QT15 MAZATROL CAM T2 1989

PLEASE HELP

[Ashley lab]

Hi Did you manage to find the parameters for your Mazak?

[Mammed]

HELLO
need all about MAZATROL CAM T2

[Al_The_Man]

P.M. me email add

[sun]

With the parameters, you need to add a parity bit (9 bits) so if you are entering 00001000 you add a 1 on the end for the one bit set.
e.g. 000010001 if it was 00001101 the entry would be 000011013
Al.

I don't know parameter code OP1-OP16.Can you help me?
Thanks.

[Al_The_Man]

I don't know parameter code OP1-OP16.Can you help me?
Thanks.

What machine is this?

[sun]

What machine is this?

Mazak QT15 Mazatrol Cam T2

[M_Angooti]

Hi i am need help for parameter quickturn20 by mazatrol cam t2