hello
i need a mastercam postrprocessor for weeke because now i work with homag woodwop 5 for generate the .nc code but it don´t have much posibilities for 3d machining
sorry for my bad english
The most mastercam dealer sells postprocessores for homag and Weeke machines. The big problem: They posts only universalmakros (G-Codes). If you get more, you need a professional postprocessor. I did develope together with our mastercam-dealer a really good postprocessor: All WoodWop-Makros are possible. If you have any interest send me a message. Also I can send you are example as mpr-file.
Greetings from Germany.
Hi there
our floppy disk was broken on our weeke BP15 homatic 2000.
Does anyone have experience with USB-floppy emulator installing on weeke BP15 homatic 2000. I bought Gotek emulator and have problems with installing. i install it on my desktop PC like 1.44MB 3.5" and after that I try install it on weeke machine without success.
on machine display i can read OS-9/68KB floppy Disk type is 5" floppy (but in reality i see 3.5")
Sectors/tracks = 32
min. sect allocation = 8
...
i have picture of this screen.