Need Help! Mastercam Startup Problems


Results 1 to 12 of 12

Thread: Mastercam Startup Problems

  1. #1
    Registered Neceda's Avatar
    Join Date
    Apr 2009
    Location
    United States of America
    Posts
    3
    Downloads
    0
    Uploads
    0

    Question Mastercam Startup Problems

    OK... so its my 4th attempt at installing Mastercam X3... i downloaded X3 and X3 MU1 both from mastercam.com... i have a licensed network through my school at Rensselaer Polytechnic Institute (RPI) and contrary to what the site says X3 will run on Windows Vista.. I know because my teachers and classmates all use X3 on Vista...

    so the problem is whenever i try to start up X3 I get the same error message:
    " NO SIM FOUND "

    Now I am connected to my network even though I'm off campus and I've already copied the nethasp from my school into the c://xcamx directory.. also i reinstalled the drivers for the SIM... and yet I still get the error message...

    ANYONE GOT ANY SUGGESTIONS???

    Similar Threads:


  2. #2
    Registered Rally's Avatar
    Join Date
    Jan 2007
    Location
    USA
    Posts
    203
    Downloads
    0
    Uploads
    0

    Default

    Try following these directions!
    http://www.mastercam.com/Support/Tec...00_NetHASP.htm
    The "No Sim found" error points to the inabillity to read the network licens key!
    If you google it you will also find other solutions for that problem.

    All comments made are my opinion!


  3. #3
    Registered Neceda's Avatar
    Join Date
    Apr 2009
    Location
    United States of America
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default

    haha i actually looked through there but gave it another shot... i reconfigured the nethasp.ini file and what-do-ya-know it worked!!! thanx!!!!!



  4. #4
    Registered Rally's Avatar
    Join Date
    Jan 2007
    Location
    USA
    Posts
    203
    Downloads
    0
    Uploads
    0

    Default

    Figured as much.

    You may want to add "RESOLVED" to your Title.

    All comments made are my opinion!


  5. #5
    Registered
    Join Date
    Jan 2006
    Location
    CROATIA
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by Neceda View Post
    haha i actually looked through there but gave it another shot... i reconfigured the nethasp.ini file and what-do-ya-know it worked!!! thanx!!!!!
    Can u send me that file to: mario.mlinaric@gmail.com?
    Or can U tell me what did U modify?
    Thnx.



  6. #6
    Registered
    Join Date
    Jan 2006
    Location
    Australia
    Posts
    30
    Downloads
    0
    Uploads
    0

    Default same problem

    I have the same problem can you send me the info on how to fix.



  7. #7
    Registered
    Join Date
    Oct 2010
    Location
    usa
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default who to fix "no SIM"

    Quote Originally Posted by Neceda View Post
    haha i actually looked through there but gave it another shot... i reconfigured the nethasp.ini file and what-do-ya-know it worked!!! thanx!!!!!
    would you please send me the way to fix it because I have the same problem you had.

    thank you



  8. #8
    Registered
    Join Date
    Aug 2010
    Location
    USA
    Posts
    18
    Downloads
    0
    Uploads
    0

    Default ***no sim found***

    can someone send me the fix too?



  9. #9
    Registered
    Join Date
    Jan 2011
    Location
    usa
    Posts
    96
    Downloads
    0
    Uploads
    0

    Default

    I have the same "no sim" problem. could you send more details on the ini reconfig. Thanks, Chuck



  10. #10
    Registered
    Join Date
    Mar 2011
    Location
    America
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default I NEED SERIOUS HELP

    ok so im the only girl in my Machine Tech class im a first year student but I seem to be doing pretty well in here. My teacher is having me install the program Mastercam X3 to some of the computers in the lab. So I set them up however when I tried to open it I got the error message of NO SIM FOUND, Im pretty good with computers but no where near good enough to figure this out on my own. Please help anything would be great! thanks

    ~Sixela



  11. #11
    Registered
    Join Date
    Jan 2011
    Location
    usa
    Posts
    96
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by sixela View Post
    ok so im the only girl in my Machine Tech class im a first year student but I seem to be doing pretty well in here. My teacher is having me install the program Mastercam X3 to some of the computers in the lab. So I set them up however when I tried to open it I got the error message of NO SIM FOUND, Im pretty good with computers but no where near good enough to figure this out on my own. Please help anything would be great! thanks

    ~Sixela
    You can't do the installation using "remote desktop"



  12. #12
    Registered
    Join Date
    Feb 2013
    Location
    Nigeria
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Basil Okoro

    I have the same problem and i don't know what to do about it. Please is there any solution to the problem?

    Quote Originally Posted by Neceda View Post
    OK... so its my 4th attempt at installing Mastercam X3... i downloaded X3 and X3 MU1 both from mastercam.com... i have a licensed network through my school at Rensselaer Polytechnic Institute (RPI) and contrary to what the site says X3 will run on Windows Vista.. I know because my teachers and classmates all use X3 on Vista...

    so the problem is whenever i try to start up X3 I get the same error message:
    " NO SIM FOUND "

    Now I am connected to my network even though I'm off campus and I've already copied the nethasp from my school into the c://xcamx directory.. also i reinstalled the drivers for the SIM... and yet I still get the error message...

    ANYONE GOT ANY SUGGESTIONS???




Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Mastercam Startup Problems

Mastercam Startup Problems