mastercam 9, USE ENTRY POINT


Results 1 to 2 of 2

Thread: mastercam 9, USE ENTRY POINT

  1. #1
    Registered
    Join Date
    Mar 2007
    Location
    usa
    Posts
    5
    Downloads
    0
    Uploads
    0

    Question mastercam 9, USE ENTRY POINT

    mastercam 9, USE ENTRY POINT, in lead in lead out. I want to force the tool to enter the work at a designated spot to contour. I have not had any success. Please tell me how to accomplish this. I have been using the arcs and lines, but that is not very efficient.

    Similar Threads:


  2. #2
    Registered
    Join Date
    Aug 2007
    Location
    usa
    Posts
    95
    Downloads
    0
    Uploads
    0

    Default

    Create a point where you want to enter,then on toolpath,chain pick the point first,then the contour.Then on your tool paramaters goto your lead in lead out page enter 0 on everything then check the use entry point box.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

mastercam 9, USE ENTRY POINT

mastercam 9, USE ENTRY POINT

mastercam 9, USE ENTRY POINT