MC 9.1who's running it now-


Page 1 of 2 12 LastLast
Results 1 to 20 of 27

Thread: MC 9.1who's running it now-

  1. #1
    Member cadcam's Avatar
    Join Date
    Apr 2003
    Location
    United States
    Posts
    3578
    Downloads
    0
    Uploads
    0

    Default MC 9.1who's running it now-

    Who is running and have you found most of the new features like "Create"" Fillet"" Clearnce"?

    Similar Threads:
    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
    Cadcam
    Turning Product Specialist for a Software Company, contract Programming and Consultant , Cad-Cam Instructor of Mastercam .


  2. #2
    Registered hardmill's Avatar
    Join Date
    Mar 2003
    Location
    United States
    Posts
    499
    Downloads
    0
    Uploads
    0

    Default 9,1

    Should have it soon . What do I have to look forward to
    CADCAM?

    Last edited by hardmill; 04-29-2003 at 11:05 PM.


  3. #3
    Registered MachineSMM's Avatar
    Join Date
    Mar 2003
    Location
    Minnesota
    Posts
    34
    Downloads
    0
    Uploads
    0

    Default

    I got it. Actually this is the first seat that we bought. So far so good. I am really liking it.

    MachineSMM


  4. #4
    Registered HomeCNC's Avatar
    Join Date
    Mar 2003
    Location
    United States
    Posts
    779
    Downloads
    0
    Uploads
    0

    Default

    I have it as well. I have not used it to find out much of the new features. If they added much in the CAD side I will not see them anyway because I use Solidworks for CAD.

    Thanks

    Jeff Davis (HomeCNC)
    http://www.homecnc.info


    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)


  5. #5
    Member cadcam's Avatar
    Join Date
    Apr 2003
    Location
    United States
    Posts
    3578
    Downloads
    0
    Uploads
    0

    Default

    Well as you folks move thru and have thoughts or questions please feel free to ask.

    I will be posting some of the new features over the next week or so.

    HomeCNC are you using the MCdirect with your solid works so as you finish your part in SW you hit the MC button at the top in SW and it will launch MC and bring your file right in and also check for say diffrences in an existing file that may have made changes to?

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
    Cadcam
    Turning Product Specialist for a Software Company, contract Programming and Consultant , Cad-Cam Instructor of Mastercam .


  6. #6
    Registered Rekd's Avatar
    Join Date
    Apr 2003
    Location
    teh Debug Window
    Posts
    1876
    Downloads
    0
    Uploads
    0

    Default

    I have it and love it. Especially the VBS, although somewhat limited and still a bit buggy. At least it's there for me to destroy my day, (and un-fortunately, a couple of not-so-recently backed up MC files that I happened to wipe out)

    The extra pocket finishing options are sweet. The MW Zoom R0X0Rs meh B0X0Rs. And the Leadin/Leadout options are real nice for deburring tools going against walls, or EMing a tab or what ever.

    All in all, very nice. Kudos once again CNC Software for listening to your customers!

    Matt
    San Diego, Ca

    ___ o o o_
    [l_,[_____],
    l---L - □lllllll□-
    ( )_) ( )_)--)_)

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)


  7. #7
    Member JIMMY's Avatar
    Join Date
    Mar 2003
    Location
    united states
    Posts
    201
    Downloads
    0
    Uploads
    0

    Default

    My shop has it but has not used it yet. I heard that you will able to zoom and pan around the verify screen just like you can while you are drawing. If I find anymore info on v9 I will let you guys know.


    JIMMY

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)


  8. #8
    Member cadcam's Avatar
    Join Date
    Apr 2003
    Location
    United States
    Posts
    3578
    Downloads
    0
    Uploads
    0

    Default

    Jimmy you are correct. You will also see in Varify that the view your model is in when you go to varify will be the same view in Varify and vise versa from varify screen to the model.

    Jimmy why have you not used it yet?

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
    Cadcam
    Turning Product Specialist for a Software Company, contract Programming and Consultant , Cad-Cam Instructor of Mastercam .


  9. #9
    Registered CAMmando's Avatar
    Join Date
    May 2003
    Location
    Phila PA, USA
    Posts
    146
    Downloads
    0
    Uploads
    0

    Default

    Hi All,

    I made a wrong turn at the emastercam.com forum and wound up here .

    Anyway... Just started using 9.1 Mill and wire havent done much with Lathe.

    I am dying to mess with the VBS stuff, but I know once I start I ill have no life so I am forcing myself not to look at it until I have more time available.

    One of the simple things I used yesterday is the Alter endpoints on the lead in leadout page. Probably saved 1/2 hour on a part that had to have machined edgebreaks all over. No extra drive geometry required. Oh yeah and the feed rate on the leads too Its the little things that mean alot. I Like the new verify once I got uset to the zoom thing. Using STL stock files which working well so far. I was away from Mastercam for a little while and at that time I hadnt used the STL files for verify. Most of our models are solid modled in our other CAD system now at each operation for operation sketches so I have solids available to convert to STL for verification and Im really liking that.

    Im still staring at the High Feed button every day saying I probably should be using this.

    In Wire, Im getting used to the new T/C points and Im glad they added Start point definition in the parameters page.

    Wee aim to please ... You aim to ... PLEASE.


  10. #10
    Registered
    Join Date
    Apr 2003
    Location
    UK
    Posts
    17
    Downloads
    0
    Uploads
    0

    Default

    We have it now but isn't it sad that it is still 8 years behind. It is crazy that it is still not Windows. We use Solidworks for our design and when we use Mastercam it's like stepping well back in time. Well back.

    Harry



  11. #11
    Member cadcam's Avatar
    Join Date
    Apr 2003
    Location
    United States
    Posts
    3578
    Downloads
    0
    Uploads
    0

    Default

    Cruncher Is this feeling due to the GUI or are you saying that the tolls are old school?

    If you are talking about the GUI the big jump is coming I know this bothers alott of folks.

    I can't wait for Version X beta to start.

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
    Cadcam
    Turning Product Specialist for a Software Company, contract Programming and Consultant , Cad-Cam Instructor of Mastercam .


  12. #12
    Registered
    Join Date
    Apr 2003
    Location
    UK
    Posts
    17
    Downloads
    0
    Uploads
    0

    Default

    The main problem is the interface being DOS and all the functions are like DOS also. They have been saying for years that it will be windows but when?. Because it is still DOS even the function keys are wrong take even the F1 key for example. Also when using it a lot of the dialogues stay on the screen and you have to repaint to close them. While previewing a file to open try changing directories and see where you go. That is just typical how much of it is a disaster to use after using Solidworks.



  13. #13
    Member cadcam's Avatar
    Join Date
    Apr 2003
    Location
    United States
    Posts
    3578
    Downloads
    0
    Uploads
    0

    Default

    Cruncher you want to take my F1 key away
    I had made the comment earler they are in the middle of produing the Ver "X" that will be as you ask, I have seen some of it is comming.

    But as for the Dialogue windows stayng te screen I ony see this with the wrong video cards.


    While previewing a file to open try changing directories and see where you go.
    Were are you going I am not understanding this comment.
    Please recap for me?

    What OS are you using?

    Thanks

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
    Cadcam
    Turning Product Specialist for a Software Company, contract Programming and Consultant , Cad-Cam Instructor of Mastercam .


  14. #14
    Registered
    Join Date
    Apr 2003
    Location
    UK
    Posts
    17
    Downloads
    0
    Uploads
    0

    Default

    It seems strange that you would say it is the video card that stop the dialogues being repainted as we have around 20 other software packages including Solidworks and Autocad and don't have a problem with any of them but they are all windows and Mastercam is DOS. The graphics cards we use are Nvidia G Force 4 with 64 meg ram on card. Operating system windows 2000 pro.
    Regarding the drawing preview problem It is hard to imagine that you have not seen this problem as we have it all the time.
    Go to get file
    Highlight file
    Select bitmap preview
    Preview appears
    Then click up one directory button because it is not the correct drawing so you want another directory.
    What do you get?
    You will see how infuriating it is dealing with a DOS product when you are also used to using a windows product like Solidworks.



  15. #15
    Registered hardmill's Avatar
    Join Date
    Mar 2003
    Location
    United States
    Posts
    499
    Downloads
    0
    Uploads
    0

    Default hey cruncher

    If you need help thats what we're here for. Myself or Cadcam can
    certanily answer any of your ?'s regarding Mastercam. We do gather your not happy w/ the software. Perhaps you should
    ask your employer to look into another package.
    PEACE



  16. #16
    Registered Rekd's Avatar
    Join Date
    Apr 2003
    Location
    teh Debug Window
    Posts
    1876
    Downloads
    0
    Uploads
    0

    Default

    Um, the preview button shows, you know.. like, a preview. Not folders. If you want to look at folders AND the preview, use the Preview button, not the Bitmap button...

    <edit>
    Oh, btw, you can still navigate while in Preview by using a combination of the drop-down folder list and/or the back button.
    </edit>

    'Rekd

    Matt
    San Diego, Ca

    ___ o o o_
    [l_,[_____],
    l---L - □lllllll□-
    ( )_) ( )_)--)_)

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)


  17. #17
    Member JIMMY's Avatar
    Join Date
    Mar 2003
    Location
    united states
    Posts
    201
    Downloads
    0
    Uploads
    0

    Default

    I am waiting for my shop to install it. I think they are waiting to see if all the bugs are worked out. I keep telling them to install it.

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)


  18. #18
    Member cadcam's Avatar
    Join Date
    Apr 2003
    Location
    United States
    Posts
    3578
    Downloads
    0
    Uploads
    0

    Default

    Jimmy what are they waiting for summer? well its here.

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
    Cadcam
    Turning Product Specialist for a Software Company, contract Programming and Consultant , Cad-Cam Instructor of Mastercam .


  19. #19
    Registered hardmill's Avatar
    Join Date
    Mar 2003
    Location
    United States
    Posts
    499
    Downloads
    0
    Uploads
    0

    Default No time.......

    At least thats what they probably told him.
    They got ug-nx right when it came out, bet they
    still have'nt used it.



  20. #20
    Member JIMMY's Avatar
    Join Date
    Mar 2003
    Location
    united states
    Posts
    201
    Downloads
    0
    Uploads
    0

    Default

    They installed 9.1 on one computer to try it. They need to just do it.

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)


Page 1 of 2 12 LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

MC 9.1who's running it now-

MC 9.1who's running it now-