drilling a uniform depth on a 3d counter

[Shide]

Trying to drill holes .03 deep on a countered surface /solid with x9 it is for brail so i need to repeat the proses over and over on the same surface

Similar Threads:

• O-1 Steel Drilling and counter bore question???
• Need help - router drilling depth increasing
• Drilling depth
• Drilling depth is wrong detected

[Superman]

Your drillpoints are placed on the part surface, select them, then set the drilling Depth to incremental Z-0.03

[joeavaerage]

Hi,
not much help with the toolpath.....but I start talking Braile when drunk.....does that help?

Craig