Simulated toolpath

[DrakeCook]

When I simulate my toolpath, my drill path looks fine, however my saw path looks wonky. How can I spin the tool to not go perpendicular into the slot? Thank you for your time, and help!

Similar Threads:

• Support Video - Special ITS Tooling system being programmed and simulated in Dolphin
• Problem- Recalculating toolpath results in error "Add toolpath to Rhino failed!"
• Newbie- Simulated run in Mach 4
• Camworks Virtual Machine error " Toolpah could not be simulated"
• Program to generate drill pattern for simulated night sky for LED ceiling

[DrakeCook]

I found my issue. When I choose solids my blade turns, when I choose wire frame, the blade stays how it should. Could someone explain to me like they would a 5 year old why this is? Haha

[joynerparsons]

I found my issue. When I choose solids my blade turns, when I choose wire frame, the blade stays how it should. Could someone explain to me like they would a 5 year old why this is? Haha

Have you ever thought that something went wrong at some stage?
we become what we behold

[danialfreud]

Have you ever thought that something went wrong at some stage?
seeing angel number 1212

Isn't there any android or ios tool for simulated toolpath? I believe it is easier done on the phone than on computer.

[IvyMiller]

I think you can try rotating the gnomon along the scale displayed in the graphics window. Use the Auto Cursor position and type the rotation angle or sketch the point. Then, the tool will automatically spin. If you want to get more detailed instructions, check out geometry dash.