Jimmy, this really hard to see what you asking as a blend. can you send me your file? Also long time know see hear. hope you are well.
I am trying to cut the green surface with unified parallel toolpasth. I want the cutter to cut the green surface parallel to the orange surface. I am using a 6 mm bullnose endmill and want the cutter to blend into the orange surface. I got it to cut the way that I want but I can not get it to blend into the orange surface. How can I control the depth it goes? Any help would be appreciated.
Similar Threads:
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Jimmy, this really hard to see what you asking as a blend. can you send me your file? Also long time know see hear. hope you are well.
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Cadcam
Turning Product Specialist for a Software Company, contract Programming and Consultant , Cad-Cam Instructor of Mastercam .