Trapezoidal Coarse Thread DIN 103 in Mastercam


Results 1 to 2 of 2

Thread: Trapezoidal Coarse Thread DIN 103 in Mastercam

  1. #1
    Member knezj's Avatar
    Join Date
    Mar 2020
    Posts
    2
    Downloads
    0
    Uploads
    0

    Smile Trapezoidal Coarse Thread DIN 103 in Mastercam

    Hello all ! I would like to make external threading (shaft) of trapezodial thread in DIN standard size (or ISO, ist the same), dia 100 x 12 , DIN 103. My mastercam does not have any inserts to suit this need, I also do not find any possibility to make new custom insert (for example from Seco dxf geometry according to catalog insert : SECO 26ER10.0TR CP500 ).

    Thank you guys !

    Similar Threads:


  2. #2
    Member
    Join Date
    Mar 2008
    Location
    USA
    Posts
    683
    Downloads
    0
    Uploads
    0

    Default Re: Trapezoidal Coarse Thread DIN 103 in Mastercam

    Drive the cutter on the center of the tool and run on a wireframe helix.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Trapezoidal Coarse Thread DIN 103 in Mastercam

Trapezoidal Coarse Thread DIN 103 in Mastercam