Problem 4th axis master cam tool path problem


Results 1 to 2 of 2

Thread: 4th axis master cam tool path problem

  1. #1
    Member
    Join Date
    Sep 2017
    Location
    Pakistan
    Posts
    5
    Downloads
    0
    Uploads
    0

    Question 4th axis master cam tool path problem

    I want to program a cam profile with side milling in master cam on rotary axis while my 4th axis in horizontal position i need help to figure out the post processor and the tool path strategy which should i use rotary tool path either swarf milling thanks full for urgent help

    Similar Threads:


  2. #2
    Member cadcam's Avatar
    Join Date
    Apr 2003
    Location
    United States
    Posts
    3578
    Downloads
    0
    Uploads
    0

    Default Re: 4th axis master cam tool path problem

    I suggest you get with your Reseller as there will be a little in-depth work on the post and multiaxis.

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
    Cadcam
    Turning Product Specialist for a Software Company, contract Programming and Consultant , Cad-Cam Instructor of Mastercam .


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

4th axis master cam tool path  problem

4th axis master cam tool path  problem