Manual entry - what variable name holds the 1006 comment string?


Results 1 to 1 of 1

Thread: Manual entry - what variable name holds the 1006 comment string?

  1. #1
    Member
    Join Date
    Aug 2005
    Location
    usa
    Posts
    118
    Downloads
    0
    Uploads
    0

    Default Manual entry - what variable name holds the 1006 comment string?

    Hi. tinkering with an old post made for V8.1. Trying to look at the manual entry comment string before its output for a word in the programmer's comment, then output the comment and change a few codes if the word is present. We have this trick working on our mills, but cant seem to find what variable name the lathe package is hiding the manual entry comment in. Its not Scomm0.

    Thanks.

    Similar Threads:


  2. #2

    Join Date
    Apr 2021
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default Re: Manual entry - what variable name holds the 1006 comment string?



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Manual entry - what variable name holds the 1006 comment string?

Manual entry - what variable name holds the 1006 comment string?

Manual entry - what variable name holds the 1006 comment string?