Need Help! Help with programming multiple offsets


Results 1 to 3 of 3

Thread: Help with programming multiple offsets

  1. #1
    Member
    Join Date
    Mar 2010
    Location
    United States
    Posts
    19
    Downloads
    0
    Uploads
    0

    Default Help with programming multiple offsets

    Hello all,

    I am new to programming using multiple work offsets. The job I am programming is using g54 - g59, 3 parts per vise, and I have attached a sample. The machinist told me each part has been indicated in and registered under the correct offset. When the program runs it locates the first part in each vise G54 and G57, but when it moves to the other offsets it is no where near where it should be.

    The machine is a Haas VF3 and I am programming with mastercam.

    Thanks in advance for any help!

    G20
    G0 G17 G40 G49 G80 G90
    (1/8 SPOTTING DRILL AND CHAMFER)
    T6 M6
    G187 P3 E.001
    G0 G90 G54 X-.5483 Y.056 S2139 M3
    G43 H6 Z.25
    G99 G81 Z-.045 R.25 F1.
    X-.1884 Y-.518
    X.5428 Y-.0959
    X.2256 Y.5029
    G80
    (1/8 SPOTTING DRILL AND CHAMFER)
    G55 X-.5483 Y.056 Z.25
    G99 G81 Z-.045 R.25 F1.
    X-.1884 Y-.518
    X.5428 Y-.0959
    X.2256 Y.5029
    G80
    (1/8 SPOTTING DRILL AND CHAMFER)
    G56 X-.5483 Y.056 Z.25
    G99 G81 Z-.045 R.25 F1.
    X-.1884 Y-.518
    X.5428 Y-.0959
    X.2256 Y.5029
    G80
    M5
    G91 G28 Z0.
    M01
    (1/16 DRILL)
    T1 M6
    G187 P3 E.001
    G0 G90 G54 X-.5483 Y.056 S4278 M3
    G43 H1 Z.1
    M8
    G99 G83 Z-.1969 R.1 Q.05 F4.
    X-.1884 Y-.518
    X.5428 Y-.0959
    X.2256 Y.5029
    G80
    (1/16 DRILL)
    G55 X-.5483 Y.056 Z.1
    G99 G83 Z-.1969 R.1 Q.05 F4.
    X-.1884 Y-.518
    X.5428 Y-.0959
    X.2256 Y.5029
    G80
    (1/16 DRILL)
    G56 X-.5483 Y.056 Z.1
    G99 G83 Z-.1969 R.1 Q.05 F4.
    X-.1884 Y-.518
    X.5428 Y-.0959
    X.2256 Y.5029
    G80
    M5
    G91 G28 Z0. M9
    M01
    (M2X.4 TAP)
    T7 M6
    G187 P3 E.001
    G0 G90 G54 X-.5483 Y.056 S100 M3
    G43 H7 Z.25
    G99 G84 Z-.197 R.25 F1.5748
    X-.1884 Y-.518
    X.5428 Y-.0959
    X.2256 Y.5029
    G80
    M5
    G91 G28 Z0.
    M01
    (#60 DRILL)
    T2 M6
    G187 P3 E.001
    G0 G90 G54 X-.3319 Y-.3871 S6750 M3
    G43 H2 Z.1
    M8
    G99 G83 Z-.1969 R.1 Q.04 F6.5
    X.5012 Y.0939
    G80
    (#60 DRILL)
    X-.3319 Y-.3871
    G99 G83 Z-.1969 R.1 Q.04 F6.5
    X.5012 Y.0939
    G80
    (#60 DRILL)
    G55 X-.3319 Y-.3871 Z.1
    G99 G83 Z-.1969 R.1 Q.04 F6.5
    X.5012 Y.0939
    G80
    (#60 DRILL)
    G56 X-.3319 Y-.3871 Z.1
    G99 G83 Z-.1969 R.1 Q.04 F6.5
    X.5012 Y.0939
    G80
    M5
    G91 G28 Z0. M9
    M01

    Similar Threads:


  2. #2
    Member cadcam's Avatar
    Join Date
    Apr 2003
    Location
    United States
    Posts
    3578
    Downloads
    0
    Uploads
    0

    Default Re: Help with programming multiple offsets

    How did you program it. are they all the same parts and used transform with offsets?

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
    Cadcam
    Turning Product Specialist for a Software Company, contract Programming and Consultant , Cad-Cam Instructor of Mastercam .


  3. #3
    Member
    Join Date
    Jan 2009
    Location
    United States
    Posts
    103
    Downloads
    1
    Uploads
    0

    Default Re: Help with programming multiple offsets

    Is this what you're trying to do?

    G20
    G0 G17 G40 G49 G80 G90
    (1/8 SPOTTING DRILL AND CHAMFER)
    T6 M6
    G187 P3 E.001
    G0 G90 G54 X-.5483 Y.056 S2139 M3
    G43 H6 Z.25
    G99 G81 Z-.045 R.25 F1.
    X-.1884 Y-.518
    X.5428 Y-.0959
    X.2256 Y.5029
    G80
    (1/8 SPOTTING DRILL AND CHAMFER)
    G55 X-.5483 Y.056 Z.25
    G99 G81 Z-.045 R.25 F1.
    X-.1884 Y-.518
    X.5428 Y-.0959
    X.2256 Y.5029
    G80
    (1/8 SPOTTING DRILL AND CHAMFER)
    G56 X-.5483 Y.056 Z.25
    G99 G81 Z-.045 R.25 F1.
    X-.1884 Y-.518
    X.5428 Y-.0959
    X.2256 Y.5029
    G80
    M5
    G91 G28 Z0.
    M01
    (1/16 DRILL)
    T1 M6
    G187 P3 E.001
    G0 G90 G54 X-.5483 Y.056 S4278 M3
    G43 H1 Z.1
    M8
    G99 G83 Z-.1969 R.1 Q.05 F4.
    X-.1884 Y-.518
    X.5428 Y-.0959
    X.2256 Y.5029
    G80
    (1/16 DRILL)
    G55 X-.5483 Y.056 Z.1
    G99 G83 Z-.1969 R.1 Q.05 F4.
    X-.1884 Y-.518
    X.5428 Y-.0959
    X.2256 Y.5029
    G80
    (1/16 DRILL)
    G56 X-.5483 Y.056 Z.1
    G99 G83 Z-.1969 R.1 Q.05 F4.
    X-.1884 Y-.518
    X.5428 Y-.0959
    X.2256 Y.5029
    G80
    M5
    G91 G28 Z0. M9
    M01
    (M2X.4 TAP)
    T7 M6
    G187 P3 E.001
    G0 G90 G54 X-.5483 Y.056 S100 M3
    G43 H7 Z.25
    G99 G84 Z-.197 R.25 F1.5748
    X-.1884 Y-.518
    X.5428 Y-.0959
    X.2256 Y.5029
    G80
    G55X-.5483 Y.056
    G99 G84 Z-.197 R.25 F1.5748
    X-.1884 Y-.518
    X.5428 Y-.0959
    X.2256 Y.5029
    G80
    G56X-.5483 Y.056
    G99 G84 Z-.197 R.25 F1.5748
    X-.1884 Y-.518
    X.5428 Y-.0959
    X.2256 Y.5029
    G80
    M5
    G91 G28 Z0.
    M01
    (#60 DRILL)
    T2 M6
    G187 P3 E.001
    G0 G90 G54 X-.3319 Y-.3871 S6750 M3
    G43 H2 Z.1
    M8
    G99 G83 Z-.1969 R.1 Q.04 F6.5
    X.5012 Y.0939
    G80
    (#60 DRILL)
    G55 X-.3319 Y-.3871
    G99 G83 Z-.1969 R.1 Q.04 F6.5
    X.5012 Y.0939
    G80
    (#60 DRILL)
    G56 X-.3319 Y-.3871
    G99 G83 Z-.1969 R.1 Q.04 F6.5
    X.5012 Y.0939
    G80
    M5
    G91 G28 Z0. M9
    M01



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Help with programming multiple offsets

Help with programming multiple offsets