MASTERCAM 4 AXIS FEED RATE


Results 1 to 4 of 4

Thread: MASTERCAM 4 AXIS FEED RATE

  1. #1

    Default MASTERCAM 4 AXIS FEED RATE

    I AM TRYING TO G CODE A 4 AXIS WRAPPING OPERATION IN MASTERCAM , I GET VERY SLOW FEED RATES .
    I AM USING GENERIC FANUC 4 AXIS POST .
    I HEARD OF INVERSE TIME AND THIS POST DONT OUTPUT G93 WHEN ACTIVING INVERSE TIME>
    HOW TO FIX THIS
    DID SOMEONE HAVE A POST FOR FANUC WITH INVERSE TIME.

    Similar Threads:


  2. #2
    Member
    Join Date
    Aug 2015
    Posts
    108
    Downloads
    0
    Uploads
    0

    Default Re: MASTERCAM 4 AXIS FEED RATE

    On the Parameters tab, left window towards the bottom. There should be a pull down menu labeled Axis Control.

    On Rotary Axis Control select Axis Substitution. It gives you two choices substitute X or Y axis. If the rotational axis on the rotary is inline with the X axis on your machine choose X, if its inline with Y choose Y.

    The Rotary Diameter, at the bottom, is set to the outside diameter of the part you have on the rotary. Say you want to cut a spiral groove 0.05" deep around a .75" bar mounted on the rotary. The Rotary Diameter window would have a value of 0.75. In your Linking Parameters, if the values were absolute, you would have top of stock at 0.0 and a depth of -0.05.



  3. #3

    Default

    Quote Originally Posted by ERUS View Post
    On the Parameters tab, left window towards the bottom. There should be a pull down menu labeled Axis Control.

    On Rotary Axis Control select Axis Substitution. It gives you two choices substitute X or Y axis. If the rotational axis on the rotary is inline with the X axis on your machine choose X, if its inline with Y choose Y.

    The Rotary Diameter, at the bottom, is set to the outside diameter of the part you have on the rotary. Say you want to cut a spiral groove 0.05" deep around a .75" bar mounted on the rotary. The Rotary Diameter window would have a value of 0.75. In your Linking Parameters, if the values were absolute, you would have top of stock at 0.0 and a depth of -0.05.
    Thank you for your help. I am asking for activing g93 of inverse feed time.
    I also have created a toolpath from a rolled geometry . When i tried to transform rotate toolpath the g code is not correct . How can i fix that



  4. #4
    Member
    Join Date
    Aug 2015
    Posts
    108
    Downloads
    0
    Uploads
    0

    Default Re: MASTERCAM 4 AXIS FEED RATE

    I cant get G93 active either. This is the best I can get from the code.

    G0 G17 G20 G40 G80 G90
    G49 G53 Z0.
    (CONTOUR)
    (COMPENSATION TYPE - WEAR COMP)
    M08
    M21
    T239 M6 ( 1/2 FLAT ENDMILL)
    M22 (UNLOCK)
    G0 G17 G90 G54
    X0. Y1.1074 S15000 M3
    G43 H#517 Z1.
    Z.1
    G94 G1 Z.0333 F150.
    Z-.0083
    Z-.05
    Y1.0512 F3498.05
    G41 D#517 Y.9957 F3892.75
    Y.9778 F3547.8
    Y.9589 F2356.11
    Y.9394 F1042.25
    Y.9198 F374.57
    Y.9006 F1882.4
    Y.8988 Z-.0101 F150.
    Y.897 Z.0298
    Y.8917 Z.0694 F369.61



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

MASTERCAM 4 AXIS FEED RATE

MASTERCAM 4 AXIS FEED RATE