Problem rotary advanced PLEASE HELP


Results 1 to 2 of 2

Thread: rotary advanced PLEASE HELP

  1. #1
    Member Michael82's Avatar
    Join Date
    Nov 2007
    Location
    usa
    Posts
    361
    Downloads
    0
    Uploads
    0

    Default rotary advanced PLEASE HELP

    Hello to all , I am tring to machine this part using a 4th axis . I have been able to come up with a basic tool path using the axis sub. but I need to do a little bit more ot the part that axis sub is not made for or I cant get it to do what I am wanting it to do .. anyway I have attached a mastercam 2018 part file that i am trying to machine I need to cut the material ni between the ribs without cutting into the wall on the right end of the part . I have to use a 1/4" carbide endmill because the drawing calls for a 1/8" corner radius in the corners on the right newd of the part . I have played around with rotary advanced but I dont know what it is asking for in each box . If someone could expaln what the steps are and what each box is asking for would really help

    Similar Threads:
    Attached Files Attached Files


  2. #2
    Member
    Join Date
    Aug 2015
    Posts
    108
    Downloads
    0
    Uploads
    0

    Default Re: rotary advanced PLEASE HELP

    Try this.

    The rotary diameter is the diameter of your part.

    Attached Files Attached Files


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

rotary advanced  PLEASE HELP

rotary advanced  PLEASE HELP