You need a DNC program. Hyperterminal on older PC's will work, not sure if it's still built into Win10.
A cheap or free program is Codeshark that can be found on the web. Many others out there...
Sent from my SM-G965U using Tapatalk
Hi there just wonder if anyone know how I can transfer program to machine from my laptop using usb cable to 25 pin do I need something special? thx
Similar Threads:
You need a DNC program. Hyperterminal on older PC's will work, not sure if it's still built into Win10.
A cheap or free program is Codeshark that can be found on the web. Many others out there...
Sent from my SM-G965U using Tapatalk
you will need a USB to serial adapter . then you need a female DB9 to D25 cable you have communications in Mastercam. of course you will need to find the proper setting in the control to match.
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Cadcam
Turning Product Specialist for a Software Company, contract Programming and Consultant , Cad-Cam Instructor of Mastercam .