Okuma LB15 OSP 5000L

[CNCAndy]

I am looking for a post processor for my Okuma LB-15 lathe with the OSP5000L control for MCX.
Yes is it a legal copy. Please don't tell me I should ask my re-seller. I did, and they want thousands of dollars.

I would thank for any help.

machineshopguelph@gmail.com

Similar Threads:

• Problem- Okuma Osp 5000L
• 1985 Okuma LB15 with 5000L Green Screen Controller
• Newbie- Okuma OSP 5000L M19 Code
• 1988 LB15 5000L-G; Tap it or single point it?
• Okuma LB15 with 5000L error message

[txcncman]

How many thousands?

[CNCAndy]

Your answer did not help me.

[txcncman]

It was not an answer. It was a response in the form of a question.

[Superman]

Tx .. you could of held back.... at least for a couple of "buy me a beer"

[cadcam]

TX you did not ask what version before giving so how do you know what you gave will work? I am figuring the 2X is x2 by chance?

[Superman]

TX you did not ask what version before giving so how do you know what you gave will work? I am figuring the 2X is x2 by chance?

Nah, 2X is 2 AXIS, not McamX2


the post Tx supplied is for McamX, it will need to have the post updated to the correct Mcam version that is running

The first line

 
 [POST_VERSION] #DO NOT MOVE OR ALTER THIS LINE# V10.00 E1 P2 T1124227469 M10.00 I0

the #V10 = McamX
X2 should be V11
X3 = V12
X5 = V14... and so on

[txcncman]

He stated "MCX". I assume "MCX" means MasterCam X. Not MasterCam X2(12). Not MasterCam 9. If he misstated his needs, that is not necessarily a mistake by me, except trying to be a little helpful. I still would not know if what I supplied would work because I did not post any G-code with it and then test that code on his machine. Maybe we can just place the responsibility where it actually belongs, on the end user, and then leave it at that.

[xal3r]

He stated "MCX". I assume "MCX" means MasterCam X. Not MasterCam X2(12). Not MasterCam 9. If he misstated his needs, that is not necessarily a mistake by me, except trying to be a little helpful. I still would not know if what I supplied would work because I did not post any G-code with it and then test that code on his machine. Maybe we can just place the responsibility where it actually belongs, on the end user, and then leave it at that.

Hello i have a question how to instal that post procesor to mastercam x6? i think i need more files to copy to mastercamx6 directory? i think i need to put to cnc_machines somthig to see in mastercam

[cadcam]

Well this file will not work as there are 3 files and he gave one file. the Machine Def and the Control def are missing that go with the post. then we need to see what version it is for to see were it will work.

[xal3r]

Well this file will not work as there are 3 files and he gave one file. the Machine Def and the Control def are missing that go with the post. then we need to see what version it is for to see were it will work.

You are right i was thinking the same way , but maybe it is posible to take this pots file and use definition of similar 2 axes machine just replace post file ?

[RapidButtonPush]

soooo 4 years later. im about to try that idea. has anyone else?

[cnc-exit]

soooo 4 years later. im about to try that idea. has anyone else?

i think i will try it

and main file is pst other you can make from similar