How many thousands?
I am looking for a post processor for my Okuma LB-15 lathe with the OSP5000L control for MCX.
Yes is it a legal copy. Please don't tell me I should ask my re-seller. I did, and they want thousands of dollars.
I would thank for any help.
machineshopguelph@gmail.com
Similar Threads:
Last edited by CNCAndy; 03-23-2012 at 12:49 PM.
How many thousands?
Your answer did not help me.
It was not an answer. It was a response in the form of a question.
Tx .. you could of held back.... at least for a couple of "buy me a beer"
TX you did not ask what version before giving so how do you know what you gave will work? I am figuring the 2X is x2 by chance?
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Cadcam
Turning Product Specialist for a Software Company, contract Programming and Consultant , Cad-Cam Instructor of Mastercam .
Nah, 2X is 2 AXIS, not McamX2
the post Tx supplied is for McamX, it will need to have the post updated to the correct Mcam version that is running
The first line
the #V10 = McamXCode:[POST_VERSION] #DO NOT MOVE OR ALTER THIS LINE# V10.00 E1 P2 T1124227469 M10.00 I0
X2 should be V11
X3 = V12
X5 = V14... and so on
He stated "MCX". I assume "MCX" means MasterCam X. Not MasterCam X2(12). Not MasterCam 9. If he misstated his needs, that is not necessarily a mistake by me, except trying to be a little helpful. I still would not know if what I supplied would work because I did not post any G-code with it and then test that code on his machine. Maybe we can just place the responsibility where it actually belongs, on the end user, and then leave it at that.
Well this file will not work as there are 3 files and he gave one file. the Machine Def and the Control def are missing that go with the post. then we need to see what version it is for to see were it will work.
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Cadcam
Turning Product Specialist for a Software Company, contract Programming and Consultant , Cad-Cam Instructor of Mastercam .
soooo 4 years later. im about to try that idea. has anyone else?