Tumbler Barrel Lining


Results 1 to 3 of 3

Thread: Tumbler Barrel Lining

  1. #1
    Member
    Join Date
    Aug 2008
    Location
    usa
    Posts
    28
    Downloads
    0
    Uploads
    0

    Default Tumbler Barrel Lining

    Hi,

    Does anyone have a recommendation for relining a tumbler tub? I got a Burr King 45, but the previous owner had a bunch of different materials cemented around the tub bottom, including what is most likely Flex seal. I have cut out and scraped what I could, and now I am trying to find something to remove what is left of the original liner. I spoke with a local Line-X company and he was confident that his product would work, and could be applied to about 3/8 thick. Just not sure if it will hold up. Any suggestions?

    Similar Threads:


  2. #2
    Member jalessi's Avatar
    Join Date
    Feb 2007
    Location
    United States
    Posts
    4553
    Downloads
    1
    Uploads
    0

    Default Re: Tumbler Barrel Lining

    Mike T,

    Take a look at Sioux Rubber.

    Custom Rubber and Urethane formulations to meet your needs

    Jeff...

    Patience and perseverance have a magical effect before which difficulties disappear and obstacles vanish.


  3. #3


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Tumbler Barrel Lining

Tumbler Barrel Lining