Need Help! polishing aluminum to mirror finish


Results 1 to 3 of 3

Thread: polishing aluminum to mirror finish

  1. #1
    Registered
    Join Date
    Jul 2009
    Location
    US
    Posts
    108
    Downloads
    0
    Uploads
    0

    Default polishing aluminum to mirror finish

    I have these parts block of aluminum with 4 holes about 1.25" dia depth 2.0" then taperes cone shape down to .5" dia. 1.0" depth. It is a through hole. I'm having trouble getting the finish I'm after without spending a ton of time. Been trying few different compounds and cone buffers.

    After a mirror finish?
    Speeds feeds compounds type of material to buff with?

    Similar Threads:


  2. #2
    Registered
    Join Date
    May 2008
    Location
    United States of America
    Posts
    13
    Downloads
    0
    Uploads
    0

    Default Vibratory Finishing

    Have you ever had these parts finished in a Vibratory machine?

    How many parts do you make?

    Giant Finishing - Made In America - Vibratory Deburring Equipment & Media



  3. #3
    Albertzhu's Avatar
    Join Date
    Jun 2018
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default

    Are you looking for cost-efficient VIBRATORY FINISHING MACHINE?



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

polishing aluminum to mirror finish

polishing aluminum to mirror finish