Rabbit Laser USA
1320 Hook Drive
Middletown, Ohio 45042

Offices: 513-217-5707
support@RabbitLaserUSA.com

Non-Metal CO2 Laser Cutting and Engraving for materials under 3/4 inch.. with work areas from 12x16 inches or 4x8feet.. 20 watts to 120 watts.
metal engraving by fiber laser for top surface of flat materials, work area of 100x100mm


Our primary business is in selling laser engraving and cutting machines. Our technical staff and warehouse technicians are sometimes low on work... so we have started taking in work for the local community. This brings the employees more experience with using the laser machines as well as an inexpensive resource for the local community of businesses, colleges, and artists. We sometimes find that a company might want more work than we can provide in our "extra" time...or you might want the work done in your local area. With these new requirements, we offer the work to one of our 1500+ customers to provide the laser service to you. I feel this is a great idea in that your company could get the needed laser services... and my laser customers can get additional customers.

Thank You,

Ray Scott
Rabbit Laser USA

Similar Threads: