Reply with QuoteDepends on how big your pipe wrench is. Sometimes they can be pretty tight.
Replace 2" reducer bushing on air compressor
I have a 60 gallon 5 HP US General air compressor. It has a 2 to 3/4 reducing bushing for the output air. I'd like to change this to 2 to 1" bushing. Does anyone know how hard these are to remove?
Similar Threads:
"You can't teach stuff in a school that you would learn in real life unless the real life people are in charge of the school." - Gene Sherman
Re: Replace 2" reducer bushing on air compressor
Depends on how big your pipe wrench is. Sometimes they can be pretty tight.
Jim Dawson
Sandy, Oregon, USA
Re: Replace 2" reducer bushing on air compressor
Make sure to hold both sides of the connection. One big wrench on each side. Otherwise you may unscrew something you were not planning to.
