Broken fans

Results 1 to 4 of 4

Thread: Broken fans

  1. #1
    Member ChrisW's Avatar
    Join Date
    May 2003
    Location
    Lake In The Hills
    Posts
    323
    Downloads
    0
    Uploads
    0

    Default Broken fans

    It's been pain in..... To replace these fans every 4 months so I decided to 3d print one.
    First try and it didn't brake.
    OEM fans have been cracking then completely breaking.

    So far 1hr spinning and going will see how long it lasts.


    Model # MRS 18-DUL

    I have the model if you want it DM me..



    Sent from my MHA-L29 using Tapatalk

    Similar Threads:


  2. #2
    Member ChrisW's Avatar
    Join Date
    May 2003
    Location
    Lake In The Hills
    Posts
    323
    Downloads
    0
    Uploads
    0

    Default Re: Broken fans

    And you can't get just the fan you need to buy entire assembly....

    Sent from my MHA-L29 using Tapatalk



  3. #3
    Member CitizenOfDreams's Avatar
    Join Date
    Nov 2012
    Location
    USA
    Posts
    1267
    Downloads
    4
    Uploads
    0

    Default Re: Broken fans

    What was the reason for the original fans to break? Aggressive chemicals, temperature, mechanical impacts, something else? I have an old large format printer where the fans are exposed to 1000W UV lightbulbs, and they still last way longer than 4 months.



  4. #4
    Member ChrisW's Avatar
    Join Date
    May 2003
    Location
    Lake In The Hills
    Posts
    323
    Downloads
    0
    Uploads
    0

    Default Re: Broken fans

    Cracking

    Sent from my MHA-L29 using Tapatalk



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Broken fans

Broken fans