Okuma ER-M-SA Encoder Pinout

Results 1 to 4 of 4

Thread: Okuma ER-M-SA Encoder Pinout

  1. #1
    Registered
    Join Date
    Mar 2008
    Location
    USA
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Okuma ER-M-SA Encoder Pinout

    I have a spindle with an Okuma ER-MA-SA TS5270N57 encoder, and I need to verify that the encoder is working.
    The wire colors are:
    1 Blue
    2 Green
    3 Yellow
    4 Red
    5 Black
    6 Blue w Black stripe
    7 Green w Black Stripe
    8 Yellow w black stripe

    I have a power supply and dual trace Fluke scope, but I don't know what the pins are

    Similar Threads:


  2. #2
    Registered
    Join Date
    Mar 2008
    Location
    USA
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Re: Okuma ER-M-SA Encoder Pinout



  3. #3
    Activation process darkman88's Avatar
    Join Date
    Dec 2018
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by jshilander View Post
    this link is dead . Could you refresh the link. I need to know this connections



  4. #4
    Member
    Join Date
    Jul 2017
    Posts
    25
    Downloads
    0
    Uploads
    0

    Default Re: Okuma ER-M-SA Encoder Pinout

    Hey man, I am in need of the pinout for the exact same encoder, but I could not open the link you posted! Could you PM me the pdf of it or find a way to send to me? Thanks!!!



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Okuma ER-M-SA Encoder Pinout

Okuma ER-M-SA Encoder Pinout