- 2d Profile has gaps in the toolpath.
-
Member
-
-
Member
Re: 2d Profile has gaps in the toolpath.
In the cutter dialog, in Speed/Settings, there is a box for Cut-link distance. It sounds like this is related to your issue and if you increase it, maybe that will help.
The madCAM help says:
Cut-link-distance: Maximum distance to travel on the model without a retract, traverse and approach motion.
- 2d Profile has gaps in the toolpath.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules