- Using Cplane to view for 5x toolpaths
-
Member
Using Cplane to view for 5x toolpaths
I had an earlier post about my post not working correctly. I'm taking that back now.
My parts are trying to cut inside of a tube. Hard to generate toolpaths for. Best way for me is to move Cplane to view, and generate a toolpaths from boundary curves.
This results a toolpath that looks great on the screen, but when I try and cut the part, it's off.
I generated a 5x Z level finishing from world top and it cuts as it should. So my post is working correctly.
There's a problem with Madcam generating the toolpaths correctly from this Cplane to view.
Are people having luck using generating toolpaths this way? What am I doing wrong?
Similar Threads:
-
-
Member
Re: Using Cplane to view for 5x toolpaths
I'm changing c plane to view in my perspective window. And doing all my work in the perspective window.
I noticed my top view, front, and right view still are in world top c plane.
Am I missing something in my Rhino settings, or am I using c plane to view correctly only in perspective window?
-
Member
Re: Using Cplane to view for 5x toolpaths
No advice or help?
Does anyone use c plane to view? Am I missing something?
-
Member
Re: Using Cplane to view for 5x toolpaths
Its been a while, but if I remember correctly, the c plane is tied to an individual view. If the c plane orientation is correct for your operation in a given view, I believe the tool path will need to be posted from that view. Does that make sense? I'm 4 years away from doing 5 axis work in RhinoCam, so I could be wrong.
- Using Cplane to view for 5x toolpaths
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules