Joakim made me a custom post for my machine, but it's not correct. Atleast I'm 99% sure it's the post. I'm not throwing him under the bus, he has helped... but it's just not right and he's been hard to get a hold of.

5 axis trunnion machine. Using Mach3 in inches.

A axis is centered to spindle, and X axis.
A axis rotates in - direction to allow part to be viewed when cutting.

B axis is +3.856" above A axis centerline. B axis turns clockwise with a - movement.

I always zero my part to X0,Y0,Z0 (which is top of B axis) A0,B0.

Can anyone offer some help or guidance please? Been working on this for a month.

Similar Threads: