Problem Parameters for a Miyano BND 34s Fanuc 31-T. can't generate a adius.


Results 1 to 2 of 2

Thread: Parameters for a Miyano BND 34s Fanuc 31-T. can't generate a adius.

  1. #1
    Member larryre59's Avatar
    Join Date
    Feb 2020
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Parameters for a Miyano BND 34s Fanuc 31-T. can't generate a adius.

    We had a board go out on our Miyano BND 34s with a Fanuc 21-T control. With the Help of Fanuc and Local Miyano service, We have the machine up and running, but it doesn't generate a Radius. We bought the machine used and found out that we didn't have the parameters for the machine. fanuc entered parameters they thought would work. Miyano hasn't been able to help.
    We have a program that uses a G03 X.75 Z-.05 R.05. And the machine does a big radius away from the part on the Z axis and then way above on the X axis and stops at the end point but doesn't come close to the part.

    Program Example:
    G00 X.85 Z0.1
    G00 X.65
    G01 Z0 F.005
    G03 X.75 Z-.05 R.05
    G01 Z-1.0
    X.8
    G00 X7.0 Z7.0
    M01

    Similar Threads:
    Last edited by larryre59; 02-17-2020 at 01:57 PM. Reason: spelling


  2. #2
    Member Chrisptm's Avatar
    Join Date
    Feb 2020
    Posts
    3
    Downloads
    5
    Uploads
    0

    Default Re: Parameters for a Miyano BND 34s Fanuc 31-T. can't generate a adius.

    Quote Originally Posted by larryre59 View Post
    We had a board go out on our Miyano BND 34s with a Fanuc 21-T control. With the Help of Fanuc and Local Miyano service, We have the machine up and running, but it doesn't generate a Radius. We bought the machine used and found out that we didn't have the parameters for the machine. fanuc entered parameters they thought would work. Miyano hasn't been able to help.
    We have a program that uses a G03 X.75 Z-.05 R.05. And the machine does a big radius away from the part on the Z axis and then way above on the X axis and stops at the end point but doesn't come close to the part.

    Program Example:
    G00 X.85 Z0.1
    G00 X.65
    G01 Z0 F.005
    G03 X.75 Z-.05 R.05
    G01 Z-1.0
    X.8
    G00 X7.0 Z7.0
    M01
    What does the machine do with the following
    G0 X.85 Z0.1
    X.65
    G1 Z0 F.005
    X.75 R.05
    Z-1.0
    G0 X7.0 Z7.0
    M01



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Parameters for a Miyano BND 34s Fanuc 31-T. can't generate a adius.

Parameters for a Miyano BND 34s Fanuc 31-T. can't generate a adius.

Parameters for a Miyano BND 34s Fanuc 31-T. can't generate a adius.