- Need Help!- "machining_time" not showing the tine?
-
Member
"machining_time" not showing the tine?
Joakim,
"machining_time"
It does not show a time (see output below), what am I doing wrong?
Best Regards,
Mauri.
*PROGRAM_START*
(madCAM 5Xtra 4 Axis for Mach4)
(File Created: "datetime")
"documentname"
(Tool Path Profile "method")
(Tool Number = "toolnr")
(Tool Offset Number = "tooloffsetnbr")
(Tool Name = "toolname")
(Tool List = "cutter_tool_list")
(Tool Dia = "tool_diameter")
(Tool Radius = "tool_radius")
(Tool Radius Compensation = "tool_radius_compensation")
(Tool Length = "tool_length")
(TIME/PROGRAM: estimated programtime: = "machining_time")
(X = "xwidth", Y = "ywidth", Z = "zheight")
()
(madCAM 5Xtra 4 Axis for Mach4)
(File Created: 07-Feb-20 4:57:40 AM)
(Tool Path Profile Planar)
(Tool Number = 28)
(Tool Offset Number = )
(Tool Name = BALL_END_9.525 Roughing .03TT)
(Tool List = BALL_END_9.525 Roughing .03TT)
(Tool Dia = 9.525)
(Tool Radius = 4.762)
(Tool Radius Compensation = 9.525)
(Tool Length = 38.000)
(TIME/PROGRAM: estimated programtime: = )
(X = 299.878, Y = 89.154, Z = 91.900)
()
Similar Threads:
-
-
Member
Re: "machining_time" not showing the time?
Thank you Joakim the time now works with the new update
Best Regards,
Mauri.
(madCAM 5Xtra 4 Axis for Mach4)
(File Created: 18-Feb-20 5:27:31 AM)
Madonna.3dm
(Tool Path Profile Planar)
(Tool Number = 28)
(Tool Offset Number = )
(Tool Name = BALL_END_9.525 Roughing .03TT)
(Tool List = BALL_END_9.525 Roughing .03TT)
(Tool Dia = 9.525)
(Tool Radius = 4.762)
(Tool Radius Compensation = 9.525)
(Tool Length = 38.000)
(TIME/PROGRAM: estimated programtime: = 15 minutes 13 seconds )
(X = 299.878, Y = 89.154, Z = 91.900)
()
N10 G00 G90 G80 G40 G17 G49 G21 G71 G64 G94
N11 S15745
N12 M03
N13 G01 Z43.740 F2800
N14 G01 X154.900 Y-4.790
N15 M06 T28
N16 G00 X299.996 Y-0.002 A-90.011
N17 G00 Z13.806
N18 G00 Z12.845
N19 G00 Z11.884
N20 G00 Z9.961
N21 G00 Z9.000
N22 G01 X299.983 Y0.009 Z8.992 A-87.542 F1260
N23 G1 G93 X299.976 Y0.012 Z8.995 A-86.318 F14813
- Need Help!- "machining_time" not showing the tine?
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules