- No cuts seen in simulator with MC 6 SR4
-
Member
No cuts seen in simulator with MC 6 SR4
Using a 3 axis machine and a pocket cut, when I run the simulator, the tool moves correctly but the model does not show any of the cuts. Thanks for any help.
Similar Threads:
-
-
Registered
Re: No cuts seen in simulator with MC 6 SR4
I have the same issue, no cuts shown on the sim. I've got MC 5.0 with Rhino 5.0.
My machine is defined as "3-axis" in the options.
Any help appreciated.
-
Member
Re: No cuts seen in simulator with MC 6 SR4
-
Community Moderator
Re: No cuts seen in simulator with MC 6 SR4
I am not at my CAM computer at the moment, but I am pretty sure I did pocketing the other day without any problems in the sim. I can check later.
-
Member
Re: No cuts seen in simulator with MC 6 SR4
I've discovered my problem. With the "Draw model" option checked, I did not see that material was removed because the model was always shown. So user error.
But it does make me wonder when it is useful to have "Draw model" checked.
- No cuts seen in simulator with MC 6 SR4
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules