No cuts seen in simulator with MC 6 SR4


Results 1 to 2 of 2

Thread: No cuts seen in simulator with MC 6 SR4

  1. #1
    Registered
    Join Date
    Dec 2011
    Location
    United States
    Posts
    45
    Downloads
    0
    Uploads
    0

    Default No cuts seen in simulator with MC 6 SR4

    Using a 3 axis machine and a pocket cut, when I run the simulator, the tool moves correctly but the model does not show any of the cuts. Thanks for any help.

    Similar Threads:


  2. #2
    Registered
    Join Date
    Dec 2012
    Location
    US
    Posts
    12
    Downloads
    0
    Uploads
    0

    Default Re: No cuts seen in simulator with MC 6 SR4

    I have the same issue, no cuts shown on the sim. I've got MC 5.0 with Rhino 5.0.
    My machine is defined as "3-axis" in the options.

    Any help appreciated.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

No cuts seen in simulator with MC 6 SR4

No cuts seen in simulator with MC 6 SR4