Bulkman Cnc Trouble with Mach 3


Results 1 to 1 of 1

Thread: Bulkman Cnc Trouble with Mach 3

  1. #1
    Member
    Join Date
    Mar 2017
    Location
    United States
    Posts
    2
    Downloads
    6
    Uploads
    0

    Default Bulkman Cnc Trouble with Mach 3

    Hello
    purchased a Bulkman Queenbee Pro
    Having trouble getting it to run with Mach 3
    it jogs smooth on all axis but will not hold position it is jerky when running G Code
    when trying to set the steps it adds steps alot from 5 mm to 80mm when adjust the numbers given it makes it worse Iam new at this but here are the settings I have so far any advice would be great


    UC300 Digital Dream controller, TB6600 micro stepper drivers, Mach3 version R3.043 Windows 10.


    Similar Threads:
    Attached Thumbnails Attached Thumbnails Bulkman Cnc Trouble with Mach 3-screenshot-motor-tuning-png   Bulkman Cnc Trouble with Mach 3-screenshot-gen-config-png   Bulkman Cnc Trouble with Mach 3-screenshot-motor-output-setting-png  
    Last edited by fz3s; 09-06-2021 at 06:48 PM. Reason: things to add


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Bulkman Cnc Trouble with Mach 3

Bulkman Cnc Trouble with Mach 3

Bulkman Cnc Trouble with Mach 3