Manual for Velox VR-3636

[kellurian]

I recently bought an unused CNC from an estate sale, but I don't have the manuals or setup. It was a sweet deal and the computer that was built with it was never hooked up or even turned on. Having said that, I would like some documentation regarding setup if anyone has one for a Velox CNC 3636. I have tried to contact the company, but they seem to have gone dark recently, as their phone has been disconnected and their last post was April 2020. Any help or advice would be appreciated. Thank you

[ger21]

I doubt the machine even came with a manual.

It was probably using Mach3 for it's control software. You can find a Mach3 manual at Newfangled Solutions CNC Software Home of Mach3

[kellurian]

I doubt the machine even came with a manual.

It was probably using Mach3 for it's control software. You can find a Mach3 manual at Newfangled Solutions CNC Software Home of Mach3

Yeah, I am reading through the mach3 manual currently, but they didn't add any support or documentation with it? This is especially in regards to the control box, like a wiring diagram, as I want to look at adding a touch probe and how to wire spindle control to my vfd. I am rather new to this level of CNC as my previous machine was a shapeoko xxl.