I have just obtained a used pressbrake by Megoform. It is a 2 metre upstroking machine but I can't find a data plate on it with the machine spec. Does anyone know where I might get a user manual for this type of machine.
It was purchased at a bankruptcy auction so I can't get any info from that source.
It is better you can post the machine photos here, so people can see if it is the same one they've got.I have just obtained a used pressbrake by Megoform. It is a 2 metre upstroking machine but I can't find a data plate on it with the machine spec. Does anyone know where I might get a user manual for this type of machine.
It was purchased at a bankruptcy auction so I can't get any info from that source.
http://cncmakers.com/cnc/controllers/CNC_Controller_System/CNC_Retrofit_Package.html