Hello everyone.
I need a manual for VFD ZONCN NZ200.
I wrote to the supplier. I wrote to the manufacturer and no one answered me.
Can you help me please?
Thanks Jirka
Similar Threads:
- Need Help!- I will buy CNC swiss type Tsugami S25D but no have manual.I need manual of machine.
- Need Help!- Colchester 3000l maintenance manual, parts manual
- Need Help!- Daewoo Puma 10s user manual and fanuc control system technical manual
- For Sale Complete Maho MH 600E Manual, + Philips 432 Programming Manual
- Wanted maintenance manual B-62175E and spindle manual B-65045E
ZONCN
Thanks
Hello.
I need to set - "device error" for relay output 1.
Set to relay output 2 - "device on" output
For analog output I need to set - output "Current frequency" - 0-10V.
But it probably doesn't have an analog VDF output.
Thank you
Next, I need to set to control the pump power with an external potentiometer.
Hi.
"And no you would not use any of the relay output for a Pot" (I don't understand this sentence)
VFD is used to control the vacuum pump power for the vacuum table. I need to adjust the power with a potentiometer. When milling holes and grooves I need to increase performance. I meant to connect the potentiometer and pressure sensor in series.
Thanks
Mactec54
Do you need to controll the VFD dynamically?Then you need a controller which has analog input and output module. Such as PLC.
The potentiometer and pressure sensor connect to the controller's input terminals, and its output terminal connect to the VFD‘s analog input terminals.
Please send it to modely.malik@seznam.cz. Max. 20Mb.
Thanks
Jirka
Mactec54