Service manual MillPlus

[grebenshchikov73]

Hello all:

We have several DMG machines with MillPlus controls (version V420) and it is getting harder and harder to find repair technicians. I don't want these machines to become orphans, they are still mechanically sound. Anyone have the Service Manual and Technical Manual for this control? We need to start up documenting them so we can repair them ourselves.

Alex

[Nerv]

Please PM me in regards to this. We may be able to help each other.

[metalcutting]

you can take support from support@quanutmautomation.com

[BRUSAT]

Hello all:

We have several DMG machines with MillPlus controls (version V420) and it is getting harder and harder to find repair technicians. I don't want these machines to become orphans, they are still mechanically sound. Anyone have the Service Manual and Technical Manual for this control? We need to start up documenting them so we can repair them ourselves.

Alex

Dear Sir, we just purchased one used DMG with the same MillPlus control as yours. Have you got Service and Technical manual already? If you have, please kindly share with me (brgiariel@gmail.com). Thank you very much!