Sharnoa Tiger 7 Manual- anybody have one?

Results 1 to 3 of 3

Thread: Sharnoa Tiger 7 Manual- anybody have one?

  1. #1

    Default Sharnoa Tiger 7 Manual- anybody have one?

    Picked up a Sharnoa hpm-30. Turns out the manuals with the machine aren't actually for the machine. Tiger 7 Control.

    Anybody have one they'd like to share or sell?

    Similar Threads:


  2. #2
    Member
    Join Date
    Dec 2015
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Re: Sharnoa Tiger 7 Manual- anybody have one?

    Tiger 5 manual works for everything I've tried. Made a post for Fusion360 using the Tiger 5 manual to set up the canned cycles.



  3. #3

    Default Re: Sharnoa Tiger 7 Manual- anybody have one?

    Quote Originally Posted by tcfab View Post
    Tiger 5 manual works for everything I've tried. Made a post for Fusion360 using the Tiger 5 manual to set up the canned cycles.
    Thanks for the info. I'm getting an error from the machine about the tool change position. I'm considering buying a Centroid Oak board to bring everything up to date. I managed to find a manual for the machine so I may try your route to get a post processor setup.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Sharnoa Tiger 7 Manual- anybody have one?

Sharnoa Tiger 7 Manual- anybody have one?