- Need Help!- Dahlih MCV-1350 with Fanuc 11M wiring
-
Member
Dahlih MCV-1350 with Fanuc 11M wiring
my Dahlih MCV-1350 with Fanuc 11M stopped working today.
the controller just says "emergency" with no error codes telling me why. I tried to bi-passed the Emergency switch and that didn't work.
that last thing that i did was press the "TOOL release Button" on the spindle head, then the controller said emergency and the hydraulic pump turned off and the machine will not clear the error.
Dose anyone have a electrical print or have any idea where I should start to hunt down the problem?
you can email me at jamiethisone@yahoo.com if you have any prints. or reply on here with any tips. I really appreciate anyone help please.
Thank you for your time Jamie.
Similar Threads:
-
- Need Help!- Dahlih MCV-1350 with Fanuc 11M wiring
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules