I can probably get a hold of a TC321N and TC321 Maintenance Manuals. If I remember well they are some 350+ pages each. I would still need to get them scanned and send them tou you. Let me know if this can help you.
jolulank
Hi guys, new to cnc zone. I just took a gamble buying an old brother tc-321 year 1990 with brother 500 control. Got it back to the shop and hooked up, and it turns on, that is about it. It came with no manuals, information or parameters.
First thing that comes up is error 39-no parameters data, 37 key board error, 140 deviation error, 387 no tool menu data. Any help or information on this machine, and these errors would be greatly helpful. Thank you
Similar Threads:
I can probably get a hold of a TC321N and TC321 Maintenance Manuals. If I remember well they are some 350+ pages each. I would still need to get them scanned and send them tou you. Let me know if this can help you.
jolulank
Hi jolulank,
I have got almost the same problem, I got a Brother TC 321N and I am searching for maintenance and user manual for a while now, but cannot find any.
If you could send these manuals, it would be really great.
schristooo
Hi schristooo,
I do not have the manuals with me, I need to go and pick them up from a friend, but I need to have them scan and then send them to you. I think they are over 350 pages. I would need you to cover for the scan. At this time I do not know how much would be but if you are interested I can ask, I can scan by my self the first 10 pages including the index so you can find out if it will help you or not.
Let me know.
jolulank
Hi jolulank,
I already got it solved, I found somebody here in germany who is hopefully sending me the complete set of manuals.
Thanks for your offer, I might come back to it, if it does not work out.
Best Regards
schristooo
Hi everybody,
I seem to have a similar issue, in that I recently bought a TC-321N, needs some work, got no manuals with it. Did you locate any, or get them scanned? I could sure use a set if anybody knows where to get them.
Thanks!
Nate
Dear schristoooo
Could you sent me the manual via e-mail: namnp2007@gmail.com
Thanks so much.
hii.. i also need tc-321 manual...
can you help me??
its my email..
ahmadrezakh213@gmail.com
thanks
hi I need tc-321 manual...
can you help me??
my email..
poporon00@nate.com
thanks
i waiting~
Hello, I'm in trouble with a TC-321N. No display at all on the controller. Kind like to ask if someone can send me the Maintenance Manual of this machine. If someone could send me the manual to cat_electronica@hotmail.com , it would be really great.
Thanks
Hi jolulank! I got a Brother TC 321N and I am searching for maintenance and user manual for a while now, but cannot find any.
If you could send these manuals, it would be really great.
Mr_Long.
hi i also need tc-321 manual...
can you help me??
its my email..
fancncfan@gmail.com
thanks
Hi everybody,
This is very old theme, but I have the same problem on TC-321N - No39 no param data, 142- deviation error, 167-index magazine error, 387- no tool data, cnc-500.
I would be very grateful if someone can help me to cope with this. We changed batteries every year, but now alarm appeared with listed errors.
Thank you in advance.
Hi , can you send me too please ?
myhenry33@gmail.com
Thanks