Brother Wire EDM HS100

Results 1 to 12 of 12

Thread: Brother Wire EDM HS100

  1. #1
    Registered
    Join Date
    Jun 2010
    Location
    Sweden
    Posts
    24
    Downloads
    0
    Uploads
    0

    Default Brother Wire EDM HS100

    Hi folks,
    I have just purchased an old 80's W-EDM machine and looking for any kind of documentation for this HS100. Priority if possible to find schematics for power supply and all otrher circuitry as well.

    I have the users manual in Swedish so I think that part is covered as I read/speak Swedish.

    So whatever documentation you may have or can link to would be appreciated.

    Cheers
    Bengt



    Similar Threads:
    Last edited by bsjoelund; 12-19-2012 at 02:07 PM. Reason: Adding picture


  2. #2
    Member
    Join Date
    Feb 2008
    Location
    AUSTRALIA
    Posts
    27
    Downloads
    0
    Uploads
    0

    Default Brother manuals

    I have some manuals for this machine, I owned one a long time ago.
    I will try and find them if you wish.
    Regards



  3. #3
    Registered
    Join Date
    Jun 2010
    Location
    Sweden
    Posts
    24
    Downloads
    0
    Uploads
    0

    Default

    Gday Skeney,

    Would you be so kind and have a look for the documents.

    Cheers from Sweden
    Bengt



  4. #4
    Registered
    Join Date
    Jun 2010
    Location
    Sweden
    Posts
    24
    Downloads
    0
    Uploads
    0

    Default

    Also very much interested in getting a copy of Brother QD-2 or QD-3 software for win3.1(or DOS) on 3,5"FDD or zip archive via e-mail.



  5. #5
    Registered
    Join Date
    Jun 2010
    Location
    Sweden
    Posts
    24
    Downloads
    0
    Uploads
    0

    Default

    Here a heads up, still looking for users manual for the WEDM HS100



    Now I have the machine working but still in need of manual to get a grip of all parameters that can be set.

    Cheers from Sweden
    Bengt



  6. #6
    Registered
    Join Date
    Jun 2010
    Location
    Sweden
    Posts
    24
    Downloads
    0
    Uploads
    0

    Default

    Hello again from Sweden,

    Still looking for documentation for this HS-100

    Anybody out there who is using or remembers what 'System Constant' in machine setup is for?
    I have hand written notes that states this setting to be '3' but would like to know what is stands for.

    I have managed to repair a floppy with QD-2 software and would like to get Communications via RS232 Cable working.
    If I understand this correctly in QD2 the setting NC is for Brother's proprietary opto-link, is the tape reader setting for RS232 output?

    So, how do one setup the HS-100 to do all Communication via RS232 Cable and not use the Opto-Link?

    Any hints of how to settings should be in PC and HS-100 are welcome, would like to get comms working and avoid manual G-code Writing on HS-100

    Cheers from Sweden
    Bengt



  7. #7
    Registered
    Join Date
    Jun 2010
    Location
    Sweden
    Posts
    24
    Downloads
    0
    Uploads
    0

    Default

    Any help in this matter would be very much appreciated.

    Cheers
    Bengt



  8. #8
    Registered
    Join Date
    Jun 2010
    Location
    Sweden
    Posts
    24
    Downloads
    0
    Uploads
    0

    Default

    Hi folks,

    I have managed to get hold of documentation in Swedish for my HS100

    Case closed

    Cheers
    Bengt



  9. #9
    Registered
    Join Date
    Jun 2010
    Location
    Sweden
    Posts
    24
    Downloads
    0
    Uploads
    0

    Default

    There is one document that I cannot get my hands on, with each HS100 there is a document with tables showing feed's and speed's for different brass wires/materials.

    Anyone out there that have this document and have the possibility to copy and make PDF of it or willing to send a paper copy via post would be much appreciated.

    Merry Christmas everybody
    Bengt



  10. #10
    Member
    Join Date
    Oct 2019
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Re: Brother Wire EDM HS100

    Hi can any one record a video working in the machine
    I just got one hs-100 and i cant get it working thanks



  11. #11
    Member AhmedFekryGalal's Avatar
    Join Date
    Jan 2020
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Re: Brother manuals

    I'm in a big problem
    I want an old machine manual (Brother HS-3100 wire cut machine)
    Please if you know any source I can find it from



  12. #12
    Member
    Join Date
    Mar 2016
    Location
    United States
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Re: Brother manuals

    Quote Originally Posted by AhmedFekryGalal View Post
    I'm in a big problem
    I want an old machine manual (Brother HS-3100 wire cut machine)
    Please if you know any source I can find it from
    Hi, I have all the manuals. Do you have parameters for this machine ?. Regards,

    Ernesto.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Brother Wire EDM HS100

Brother Wire EDM HS100