Mitsubishi Meldas 50L for Daewoo - Operation Manual - Page 2

Page 2 of 2 FirstFirst 12
Results 13 to 17 of 17

Thread: Mitsubishi Meldas 50L for Daewoo - Operation Manual

  1. #13
    Registered
    Join Date
    Aug 2012
    Location
    South Africa
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Meldas 50L

    Hi FMJ

    I have got your info from Mike.
    Your Problem is not so bad if you do have some Records of Parameters.
    The worst is that you have only printed (typed) Parameter List.
    If you do not have any, send me the Machine info : Make and Type.
    Nevertheless, you have to start with System Initialization. If you do not know how, I can help you - I can send you the procedure, you have to follow.
    I can help you also via Skype.
    Let me know Peter



  2. #14
    Registered
    Join Date
    Aug 2012
    Location
    United States
    Posts
    59
    Downloads
    0
    Uploads
    0

    Default

    Hi Peter,

    I'll give you a quick run down. This lathe belongs to our local community college. I am an instructional tech assisting the precision machinining instructor. I am not at the class full time, so I am relaying any information I can gather to the teacher. I have been told that another instructor "might" have a back up disk, but he is out on summer vacation.

    I am not opitmistic that such a disk exists, so I would surely like to get my hands on the procedure that we need to follow.

    The machine info that I have is:
    Daewoo Lynx 200 / Mitsubishi Meldas 50L

    Thank you very much for your help!!

    Jerry



    Quote Originally Posted by PVanek View Post
    Hi FMJ

    I have got your info from Mike.
    Your Problem is not so bad if you do have some Records of Parameters.
    The worst is that you have only printed (typed) Parameter List.
    If you do not have any, send me the Machine info : Make and Type.
    Nevertheless, you have to start with System Initialization. If you do not know how, I can help you - I can send you the procedure, you have to follow.
    I can help you also via Skype.
    Let me know Peter




  3. #15
    Registered
    Join Date
    Jan 2014
    Posts
    10
    Downloads
    0
    Uploads
    0

    Default

    Hi all,
    I am faced with a problem currently concerning a Yang Eangle 30 Lathe with Mitsubishi meldas 50L controller . After reset controller and reload parameters, Graphics (SFG key pressed but screen remains black) option is missing. If anybody has a procedure reactivate
    graphics again, please contact to me. My e-mail is <skiafas@otenet.gr>.Three files ALL1,ALL2, ALL3, are also the whole backup for this lathe, if anyone have such files, please send to me.
    Thak you
    KIAF
    Service Engineer



  4. #16
    Registered
    Join Date
    Aug 2014
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default

    Hello..

    We have meldas 50m machine..
    we have lost our our parameters and ladder..can u help me..



  5. #17
    Community Moderator Al_The_Man's Avatar
    Join Date
    Dec 2003
    Location
    Canada
    Posts
    22878
    Downloads
    0
    Uploads
    0

    Default Re: Mitsubishi Meldas 50L for Daewoo - Operation Manual

    Unfortunately they are of MTB/OEM origin so you would either need to contact the original machine tool builder or someone with the same machine make/model.
    Al.

    CNC, Mechatronics Integration and Custom Machine Design

    “Logic will get you from A to B. Imagination will take you everywhere.”
    Albert E.


Page 2 of 2 FirstFirst 12

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Mitsubishi Meldas 50L for Daewoo - Operation Manual

Mitsubishi Meldas 50L for Daewoo - Operation Manual