ProtoTRAK Plus programming manual

[JohnT-cen]

I hope someone can help me. I need to find a manual for a ProtoTRAK Plus. Its been over 15 years since I used one. I tried Southwestern Ind. could not find one there.

thanks

Similar Threads:

• Prototrak Plus manual
• Prototrak Plus controller manual
• For Sale Complete Maho MH 600E Manual, + Philips 432 Programming Manual
• Problem- Prototrak M3 programming help please.
• WANTED!! GibbsCAM post for Centroid M-15, ProtoTRAK LX3 and ProtoTRAK VL controls?

[Kevin45]

Which manual are you looking for and are you wanting to pay or a freebie. Southwestern has all three manuals for $43. Southwestern Industries ProtoTrak Plus Manual - UManuals

If you are looking for just a programming manual, you can download a manual for a 2 axis or 3 axis from their site. It may not be specifically for the PLUS but their manuals are basically all the same. Here is a Programming Manual for the EDGE which is 2 axis. prototrak_edge_training.pdf - Preview ebook on PDFTop.net

[Xuron]

Here is a link to the ProtoTRAK Plus Manual.
https://www.dropbox.com/s/2evbiq0igi...0Plus.pdf?dl=0

Here is a link to a ProtoTRAK Plus folder with other manuals and some programming sheets to use.
https://www.dropbox.com/sh/26r0c8fth...2977YO02a?dl=0