Need Help! s1 MOTOR NOT CONTROLLABLE! HELP ME !


Results 1 to 1 of 1

Thread: s1 MOTOR NOT CONTROLLABLE! HELP ME !

  1. #1
    Registered
    Join Date
    Apr 2018
    Location
    Canada
    Posts
    1
    Downloads
    0
    Uploads
    0

    Angry s1 MOTOR NOT CONTROLLABLE! HELP ME !

    update! apparently the encoder motor is shot? any tips lol


    the machine is a parpas diamond 5 axis, controller is heidenhain itnc530.

    the A and the C axis are acting up meaning after every time i home the machine i have to re indicate both the 4+5th axis

    and every time i turn on the machine everything goes great until the spindle turns on

    when the spindle tries to start up the machine just shuts down altogether and i have to restart the process

    i believe the encoder or the motor which drives it are fried or there is a loose wire or something

    the parpas guy was messing around in the back trying to fix things last week, clearly he made 0 progress


    how to i make the s1 motor reachable/controllable so the spindle will turn on ?!?!?!?!

    Similar Threads:
    Last edited by seeENseeGUY; 04-30-2018 at 11:37 AM. Reason: update


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

s1 MOTOR NOT CONTROLLABLE! HELP ME !

s1 MOTOR NOT CONTROLLABLE! HELP ME !